3/6/2023 Monday
Hi Guys! this is a quick post today sorry. I didn’t work this past weekend and I need some down time. Here is a card a made weeks ago, but I’m sharing with you because it’s a fun fold and has Easter Bunny too the DSP is From SAB, but it’s still cute.
Okay you see why it’s flip flop pocket not, flip one side flop the other side to reveal the pocket pullout. I friend help me come up with the name for my design.
It’s pretty easy to make, just keep in mind the pocket gets sticky.. you must work it, but to seal the pocket use a very thin line of liquid glue it’s much more narrow then tear tape, I really recommend using liquid glue but in a small thing line, keeping it close to the edge to give as much wiggle room in pocket as possible. okay here are sizes,
Base:
5 1/2” x 11” score at 4”, and 8 1/16”
note: I used a 1 1/2” circle punch for half circle for tab pull on pocket pullout. See photos above.
Inside flop- base 7”x 4 1/2” score at 3 1/2”
You can make this piece a tad bit bigger but you must make the 1/2 circle smaller to fit the card
If you want a larger flop piece you can do 7”x 4 3/4” score at 3 1/2” but remember to use smaller half circle for pull tab area….
Inside picket pullout piece is 3 1/2” x 5 1/8” I used 1 1/2” circle punch and the piece to make pull out folded in half and glued to pull out piece.
Alright, that’s it for today and i hope you had a great weekend and good Monday.. See you tomorrow.
Comments